Aquamor BGC  ·  105003
BGC Manifolds

105003

Aquamor BGC  ·  Single

Application

BGC Single Manifold, 3/8 in NPT + 1/2 in Barb, Rinse Valve and Pressure Gauge

The 105003 is Aquamor's single-cartridge manifold in the BGC line, built on 3/8 inch NPT threads with a 1/2 inch barb outlet. A rinse valve lets an installer flush a fresh cartridge before it goes into service, and a pressure gauge shows inlet pressure so a technician can see when the cartridge is loading up. It is the entry point of the BGC threaded-head family, sized for one cartridge and one job.

One cartridge, all the water

BGC Single flow pathWater enters at the inlet, flows through one filter cartridge, and exits at the outlet. All of the incoming water passes through the single cartridge.SINGLE CARTRIDGEALL FLOW THROUGH ONE STAGEINLETCartridgeOUTLET

Scroll the diagram sideways to see the full flow path.

A single-head manifold routes all incoming water through one cartridge before it leaves the manifold. There is nothing to split and nothing downstream for the water to pass through again: the cartridge installed is doing the entire job. It is the simplest arrangement in this lineup, and the most straightforward to service because there is only one cartridge to track and change.

Typical application. Lower-volume applications, a single piece of equipment, or any spot where one cartridge's flow rate and capacity are enough.

Part Number 105003
Series Aquamor BGC
Configuration Single
Flow Arrangement Single stage
Filter Heads 1
Port Size 3/8 in NPT + 1/2 in barb
Rinse Valve Yes
Pressure Gauge Yes
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response the same business day.
Contact Customer Service
Aquamor BGC Single filter manifold, part number 105003
Product Line Aquamor BGC filter manifolds. See the full manifold line.