Call us toll-free: 1-866-218-8473
OEM Manufacturing

Your OEM manufacturing partner,
from spec to shipment.

Private label, custom parts, injection molding and assembly capacity, or a straight spec review, tell us what you are working on and we will tell you plainly whether it is a fit. Our team typically responds within one business day.

Send Us Your Spec See Our Capabilities

Starts with a short discovery call. No cost to map it out. Offered subject to approval, at Aquamor's discretion.

Keep scrolling, see how we solve it
Aquamor's in-house manufacturing floor in Temecula, California, where filtration components are produced and assembled

Aquamor's manufacturing floor in Temecula, California, where engineering, molding, and assembly stay under one roof.

The OEM Challenge

The OEM headaches you already know

If you've sourced filtration before, you've lived at least one of these:

  • Offshore delays you can't see coming, a slipped container date becomes your stockout and your customer's complaint.
  • Split suppliers, split accountability, the molder blames the assembler, the assembler blames the media house, and you own the gap.
  • Certification ambiguity, "compliant" claims that don't survive a buyer's due diligence or a regulatory review.
  • Tooling held hostage, your program, your volume, but someone else's facility sets your schedule.
What We Actually Do

What an OEM program gets, all in-house

The Aquamor® OEM division runs the full manufacturing chain for your program in Temecula, California. The handoffs that usually create risk happen inside one company, on one schedule, your spec, your tooling, your volume.

Engineering & Design

In-house engineers develop your system architecture to spec, flow rate, micron rating, certification target, and housing geometry defined before a tool is cut.

In-House Injection Molding

26 injection-molding machines in-house, from 60 to 775 tons, running a tool library of over 400 active injection molds. Your housings, heads, and structural parts are molded on Aquamor's schedule, no contract-molder queue setting your lead time.

Certified Filtration Products

We manufacture filtration products certified to NSF/ANSI 42 and 53, with CSA B483.1 across applicable lines. Certification attaches to the finished filter cartridge, and every certified SKU is traceable from raw material to finished unit. See the full engineering, molding, and certification capability in detail on our Capabilities page.

Packaging & Fulfillment

Private-label packaging, retail-ready programs, and fulfillment shipped direct from Temecula.

One team. One schedule. One address.
42188 Rio Nedo, Temecula, CA 92590, where engineering, molding, production, and fulfillment all live.

  • In-house engineering team, no external design agency to brief
  • 26 in-house injection-molding machines, 60–775 ton, tool library of over 400 active injection molds
  • Filtration products certified to NSF/ANSI 42 and 53
  • IAPMO and CSA B483.1 product certifications across applicable lines
  • In-house quality lab, chlorine reduction, flow rate, pressure drop, turbidity, structural integrity
  • Private-label packaging designed and produced in-house
  • Fulfillment shipped from the same facility
An Aquamor injection-molding machine running on the Temecula, California production floor
In-house injection molding supports greater control over component quality, tooling, and production schedules.
Ways To Work With Aquamor

Three more ways to work with Aquamor manufacturing

Beyond a standard OEM program, Aquamor supports three additional paths for manufacturers with a specific need. Each has its own qualifying criteria, and each leads straight to our OEM inquiry form with the right type already selected.

Minimum $1 million per year Private Label

Launch your own line, backed by volume that justifies it

Private label is available for programs with a minimum commitment of $1 million per year in product volume. If your program is there, tell us about your brand and we will build the platform and production schedule around it.

Start a Private Label Program
Typically a one business day response Custom Parts

Parts we build for other OEMs that never make it to a catalog

Aquamor manufactures many parts for other OEMs that are not listed on our website, other than our manifold lineup. Send a drawing and a product spec sheet of what you are looking for and our team typically responds within one business day.

Request Custom Parts
Typically a one business day response Molding & Assembly Services

Injection molding and assembly capacity, when the volume works

Injection molding and assembly services are available when volumes are viable at production scale. Tell us what you are looking for and our team typically responds within one business day.

Request Molding & Assembly Capacity
Free Engineering Review

Send the spec, or just talk it through.

Send a drawing, a sample, or a current part number, or leave a phone number on the form and our engineering team will call instead, whichever is the faster path for you. Our team typically responds within one business day to tell you whether we can build it, cross it, or improve it. And if it is not a fit, we will tell you that too.

Send Us Your Spec

Free engineering review. Honest answer either way. Offered subject to approval, at Aquamor's discretion.

Track Record

Why buyers trust the output

The proof that matters most to an OEM buyer is how Aquamor product performs once it is inside someone else's branded equipment, measured on that customer's own scorecard.

Customer Result

20,552 units. Zero defects. Zero returns.

A Tier-1 national beverage-equipment manufacturer needed a filter-cartridge supplier it could put on its approved-supplier list and forget about. Aquamor earned that approval and held it. Across 20,552 units measured on the customer's own supplier scorecard over the first quarter of 2026, the result was zero defects and zero returns. When a manufacturer ships filters inside its own branded equipment, that is the number that matters.

Start an OEM conversation

That result rests on the same manufacturing facility, certification rigor, and in-house laboratories behind every Aquamor product, not special measures for an audit.

Since 2004
Building water filtration in the United States, two decades of U.S.-made filtration.
26 machines
In-house injection-molding machines, 60–775 ton, running a tool library of over 400 active injection molds, molding is a core capability, not a vendor.
NSF · IAPMO · CSA
Our filtration products are certified to NSF/ANSI 42 and 53 (listed by NSF and IAPMO) and to CSA B483.1.
150+ years
Combined water-treatment experience across the Aquamor team.
Supplier Evaluation

See exactly what it takes to switch suppliers.

Send us your current part numbers. We typically respond within one business day, mapping every SKU to an Aquamor equivalent, flagging any gaps, and giving you a side-by-side comparison, spec, certifications, and format. No commitment to switch. No pressure to move fast. Just a clear picture of what a change actually looks like.

Get My Switch Audit

Free cross-reference. No commitment to switch. Offered subject to approval, at Aquamor's discretion.

Get Started

Send us the spec

Tell us the application, your volume estimate, and the certifications you need, browse our full capabilities, request the current OEM price list, or request a sample to evaluate first. OEM price lists are not published on the website; we email them on request. Our team typically responds within one business day.

Send Us Your Spec View Full Capabilities Request the OEM Price List Request a Sample