Product that works the first time, and a number that reaches a human.
Your reputation is on every job you put your name to. Aquamor® designs and manufactures filtration systems for water-treatment professionals, installers, dealers, and specialty contractors, engineered to perform (UF systems certified to NSF/ANSI 53 for cyst reduction, inline filters manufacturer tested to NSF/ANSI 42), and backs every one of them with direct technical support from the people in Temecula who engineered it.
What goes wrong on the job
- Product that fights the install, bad fitments and vague instructions cost you time you can't bill.
- Callbacks. A leak or an early failure means a return trip, an unhappy customer, and your name on it.
- A tech question with no one to call gets routed through a phone tree that can't answer it.
- Spec uncertainty, needing to know the real flow rate, micron rating, and capacity before you commit on a job.
Designed for specification, installation, and ongoing support
Aquamor designs and manufactures filtration systems for water-treatment professionals, installers, dealers, and specialty contractors, engineered to perform (our UF systems are certified to NSF/ANSI 53 for cyst reduction, and our inline filters are manufacturer tested to NSF/ANSI 42) and backed by direct access to the team that made it. That means real published specs before you commit, and a real human on the other end when you have a question. Not sure which model fits the job? Size it before you quote it with our free sizing calculators.
- Certified UF systems, NSF/ANSI 53, with published specs you can quote on a job.
- Manufacturer-tested inline filters carry NSF/ANSI 42 testing for chlorine taste and odor, with published specs you can quote on a job.
- Serviceable design, engineered by people who think about the person changing the cartridge, not just the spec sheet.
- Direct manufacturer support: talk to the team that designed and built the unit.
- Real documentation, install guidance and spec sheets, not guesswork.
Not a call center. The manufacturer.
When you call Aquamor, you reach the company that designed and built the product, the same team that wrote the spec sheet.
Direct access to the manufacturer
Aquamor has built water filtration in the United States since 2004, with 150+ years of combined water-treatment experience on the team and an in-house lab that tests chlorine reduction, flow rate, pressure drop, turbidity, and structural integrity. When you call, you reach the company that made the product, and that's the difference between a vendor and a partner you can stake a job on.
Typical quoted lead time: 4 to 6 weeks
Most UF and DI orders are quoted at 4 to 6 weeks from order confirmation to ship, so you can set a realistic install date with your customer. Actual lead time depends on configuration and current order volume and is confirmed at quote.
Talk to the Water Treatment teamWhole-home and light-commercial ultrafiltration systems
The Aquamor UF-42xx line is a point-of-entry particulate barrier engineered for water-treatment professionals, installers, dealers, and specialty contractors. A 0.015-micron hollow-fiber membrane blocks cysts, turbidity, and suspended particles on city or well water. Designed to operate at 30-85 psi; a booster pump may be required where site conditions fall outside that range. The self-cleaning controller runs automatically between service visits.
- The UF-4210, UF-4220, UF-4410 and UF-4420 are certified to NSF/ANSI 53 for cyst reduction. Refer to the applicable model documentation for certified claims and flow specifications.
- The Modular Build-on-the-Wall platform covers four models from 8 to 30 GPM, so you can size the system to the home without switching platforms or suppliers.
- 1-inch and 3/4-inch MNPT connections, standard trade fitments; no adapters required on most jobs.
- Published dimensions: 9.2-inch W x 7.5-inch D footprint, 20-inch and 40-inch length classes, for framing, permit drawings, and client proposals.
- Direct manufacturer support, technical questions reach the Aquamor team who built it.
The same system serves both markets.
The UF-42xx platform supports both residential and light-commercial applications, and foodservice applications, depending on the model, configuration, and site requirements. Your purchase relationship is direct with Aquamor either way.
Wall-mounted deionization for spot-free and process water
When an application requires reduced dissolved minerals for spot-free rinse or process-water use, Aquamor DI systems use mixed-bed ion exchange to produce deionized water based on feed-water conditions and system capacity, for carwash, printing, detailing, aquarium, hydroponics, sterilization, and chiller or humidifier feed. The Resilite monitoring device tracks cartridge exhaustion in real time, so cartridges get replaced on schedule rather than after a quality incident takes the line down.
- Four models, single and dual cartridge, DI21 and DI24 for lower-flow work, DI43 and DI49 for continuous and higher-volume duty. Match the model to the application.
- The Resilite monitoring device flags cartridge exhaustion as it happens, so the operator can swap on schedule instead of after a quality problem shows up downstream.
- Valve-in-head, sanitary quick-change cartridges, no spills, no extra tools, and contamination control during service.
- Designed for RO or tap feed, this line specifies as a finishing stage downstream of softening, carbon, and reverse osmosis where used, with a recommended feed TDS under 500 ppm.
- Wall-mounted, low-profile build, 1/2-inch CTS connections standard, with 3/4-inch and 1-inch MNPT available on request.
Sized by capacity, not just flow.
DI capacity and output quality depend on feed-water TDS, flow demand, resin condition, and operating conditions, not TDS alone. Divide a model's rated ppm-gallons capacity by your feed TDS for a starting estimate of gallons of output before breakthrough, then confirm against actual flow demand and site conditions. DI Systems carry no NSF certification because they perform ion removal, not particulate or microbiological reduction. Spec sheets for each model are linked from the product catalog.
Size Your DI System
DI service life depends on your feed-water TDS or conductivity. Use the calculator to estimate the gallons of deionized output per cartridge for your specific water, then match the model to the duty.
Manufacturer-tested inline cartridge filtration
For jobs that call for a compact inline solution rather than a full UF or DI system, Aquamor's inline cartridge filters are manufacturer tested to NSF/ANSI 42 for chlorine taste and odor reduction. They mount in single or multi-cartridge banks with standard trade fitments, sized to the flow and duty of the application.
- Manufacturer tested to NSF/ANSI 42, published specs you can quote on a job.
- Single through multi-cartridge configurations, sized to the application's flow and duty.
- Standard trade fitments, no adapters required on most jobs.
- Direct manufacturer support, technical questions reach the Aquamor team who built it.
Have a job or a tech question?
Reach the Aquamor team directly. We'll get you the spec, the part, or the answer.