Aquamor BGE  ·  105126
BGE Manifolds

105126

Aquamor BGE  ·  Twin

Application

BGE Twin Manifold, 3/4 in NPT + 1/2 in Barb, Rinse Valve and Pressure Gauge

The 105126 is a two-cartridge parallel BGE manifold, stepped up to 3/4 inch NPT plus a 1/2 inch barb to carry the flow of a two-cartridge bank. Rinse valve and pressure gauge are standard. It fits locations that need more combined flow than the single 105124 supports.

Two cartridges sharing the load, in parallel

BGE Twin flow pathWater enters a single inlet line, then divides at a distribution header into 2 equal branches, one for each of 2 filter cartridges arranged in parallel. Each cartridge filters only its own share of the flow. After the cartridges, the 2 branches rejoin at a collection header into a single outlet line.PARALLEL BANK OF 2FLOW SPLITS ACROSS EVERY CARTRIDGEINLETABOUTLET

Scroll the diagram sideways to see the full flow path.

A twin manifold splits incoming water across two cartridges running side by side, then recombines the two streams on the outlet side. Each cartridge only treats its own share of the flow. Splitting the load this way raises the combined flow rate the manifold can support and stretches the combined capacity before either cartridge is due for a changeout, while the level of filtration each gallon receives stays the same as a single cartridge would provide.

Typical application. Equipment or a location that draws more water than a single cartridge comfortably supports.

Part Number 105126
Series Aquamor BGE
Configuration Twin
Flow Arrangement Two cartridges in parallel
Filter Heads 2
Port Size 3/4 in NPT + 1/2 in barb
Rinse Valve Yes
Pressure Gauge Yes
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response the same business day.
Contact Customer Service
Aquamor BGE Twin filter manifold, part number 105126
Product Line Aquamor BGE filter manifolds. See the full manifold line.