Aquamor BGX-C  ·  105211
BGX-C Manifolds

105211

Aquamor BGX-C  ·  Single

Application

BGX Single Manifold, 3/8 in NPT, Rinse Valve, No Gauge

The 105211 is a single-cartridge BGX manifold on 3/8 inch NPT that adds a rinse valve over the base 105210, so an installer can flush a fresh cartridge before it goes into service, but it still carries no pressure gauge. It sits between the instrumentation-free 105210 and the fully equipped 105212 in the BGX single-head line.

One cartridge, all the water

BGX-C Single flow pathWater enters at the inlet, flows through one filter cartridge, and exits at the outlet. All of the incoming water passes through the single cartridge.SINGLE CARTRIDGEALL FLOW THROUGH ONE STAGEINLETCartridgeOUTLET

Scroll the diagram sideways to see the full flow path.

A single-head manifold routes all incoming water through one cartridge before it leaves the manifold. There is nothing to split and nothing downstream for the water to pass through again: the cartridge installed is doing the entire job. It is the simplest arrangement in this lineup, and the most straightforward to service because there is only one cartridge to track and change.

Typical application. Lower-volume applications, a single piece of equipment, or any spot where one cartridge's flow rate and capacity are enough.

Part Number 105211
Series Aquamor BGX-C
Configuration Single
Flow Arrangement Single stage
Filter Heads 1
Port Size 3/8 in NPT
Rinse Valve Yes
Pressure Gauge No
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response typically within two business days.
Contact Customer Service
Aquamor BGX-C Single filter manifold, part number 105211
Product Line Aquamor BGX-C filter manifolds. See the full manifold line.