Aquamor BGC  ·  105021
BGC Manifolds

105021

Aquamor BGC  ·  Single

Application

BGC Single Bracket Assembly, 3/8 in Quick Connect, Fittings and Gauge

The 105021 is a single-cartridge BGC bracket assembly on 3/8 inch Quick Connect fittings rather than threaded NPT, with a pressure gauge included. It is built for installations where a wall or under-counter bracket mount and tool-free cartridge connections are preferred over a threaded head. As a single-cartridge build, all incoming water passes through the one cartridge, the same as the threaded 105003.

One cartridge, all the water

BGC Single flow pathWater enters at the inlet, flows through one filter cartridge, and exits at the outlet. All of the incoming water passes through the single cartridge.SINGLE CARTRIDGEALL FLOW THROUGH ONE STAGEINLETCartridgeOUTLET

Scroll the diagram sideways to see the full flow path.

A single-head manifold routes all incoming water through one cartridge before it leaves the manifold. There is nothing to split and nothing downstream for the water to pass through again: the cartridge installed is doing the entire job. It is the simplest arrangement in this lineup, and the most straightforward to service because there is only one cartridge to track and change.

Typical application. Lower-volume applications, a single piece of equipment, or any spot where one cartridge's flow rate and capacity are enough.

Part Number 105021
Series Aquamor BGC
Configuration Single
Flow Arrangement Single stage
Filter Heads 1
Port Size 3/8 in Quick Connect
Rinse Valve No
Pressure Gauge No
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response typically within one business day.
Contact Customer Service
Aquamor BGC Single filter manifold, part number 105021
Product Line Aquamor BGC filter manifolds. See the full manifold line.