Aquamor BGE  ·  105124
BGE Manifolds

105124

Aquamor BGE  ·  Single

Application

BGE Single Manifold, 3/8 in NPT + 1/2 in Barb, Rinse Valve and Pressure Gauge

The 105124 is the single-cartridge entry point of the BGE manifold line, on 3/8 inch NPT plus a 1/2 inch barb, with rinse valve and pressure gauge standard. All incoming water passes through the one cartridge, making it the simplest build in this family to install and service.

One cartridge, all the water

BGE Single flow pathWater enters at the inlet, flows through one filter cartridge, and exits at the outlet. All of the incoming water passes through the single cartridge.SINGLE CARTRIDGEALL FLOW THROUGH ONE STAGEINLETCartridgeOUTLET

Scroll the diagram sideways to see the full flow path.

A single-head manifold routes all incoming water through one cartridge before it leaves the manifold. There is nothing to split and nothing downstream for the water to pass through again: the cartridge installed is doing the entire job. It is the simplest arrangement in this lineup, and the most straightforward to service because there is only one cartridge to track and change.

Typical application. Lower-volume applications, a single piece of equipment, or any spot where one cartridge's flow rate and capacity are enough.

Part Number 105124
Series Aquamor BGE
Configuration Single
Flow Arrangement Single stage
Filter Heads 1
Port Size 3/8 in NPT + 1/2 in barb
Rinse Valve Yes
Pressure Gauge Yes
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response the same business day.
Contact Customer Service
Aquamor BGE Single filter manifold, part number 105124
Product Line Aquamor BGE filter manifolds. See the full manifold line.