Aquamor BGM  ·  105209
BGM Manifolds

105209

Aquamor BGM  ·  4+1

Application

BGM 4+1 Manifold, 3/4 in NPT, Rinse Valve and Pressure Gauge

The 105209 adds a fifth, series-mounted polish cartridge downstream of the four-cartridge parallel bank used on the 105205, on 3/4 inch NPT with rinse valve and pressure gauge standard. It is the top of the BGM line, for sites that need both maximum flow support and a dedicated final treatment stage.

Four cartridges in parallel, then a polish stage

BGM 4+1 flow pathWater enters a single inlet line and divides at a distribution header into 4 equal branches, one for each of 4 filter cartridges arranged in parallel. The 4 branches rejoin at a collection header into a single line, and all of that combined flow then passes through one additional cartridge in series, a final polish stage, before reaching the outlet. Every drop of water passes through the polish stage; only the first bank of cartridges splits the flow.4 PARALLEL, THEN 1 IN SERIESBANK SPLITS FLOW; FINAL STAGE TAKES ALLINLET1A1B1C1DStage 2POLISH STAGEOUTLET

Scroll the diagram sideways to see the full flow path.

A 4+1 manifold is the largest configuration in this family: four cartridges run side by side to carry the flow, and a fifth cartridge sits downstream in series, treating the full recombined stream one more time before it leaves the manifold. The parallel bank gives the manifold its flow rate and capacity; the fifth position is a dedicated final stage every gallon passes through.

Typical application. The highest-draw sites that also require a dedicated final treatment stage on the entire flow.

Part Number 105209
Series Aquamor BGM
Configuration 4+1
Flow Arrangement Four in parallel, then one in series
Filter Heads 5
Port Size 3/4 in NPT
Rinse Valve Yes
Pressure Gauge Yes
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response the same business day.
Contact Customer Service
Aquamor BGM 4+1 filter manifold, part number 105209
Product Line Aquamor BGM filter manifolds. See the full manifold line.