Aquamor BGE  ·  105381
BGE Manifolds

105381

Aquamor BGE  ·  Single

Application

BGE Single Manifold, 3/8 in NPT, No Rinse Valve or Gauge

The 105381 is a single-cartridge BGE manifold on 3/8 inch NPT with no rinse valve and no pressure gauge, a simpler build than the 105124 for installations that do not need on-board service instrumentation. All incoming water still passes through the one cartridge, the same flow path as every other single-head manifold in this lineup.

One cartridge, all the water

BGE Single flow pathWater enters at the inlet, flows through one filter cartridge, and exits at the outlet. All of the incoming water passes through the single cartridge.SINGLE CARTRIDGEALL FLOW THROUGH ONE STAGEINLETCartridgeOUTLET

Scroll the diagram sideways to see the full flow path.

A single-head manifold routes all incoming water through one cartridge before it leaves the manifold. There is nothing to split and nothing downstream for the water to pass through again: the cartridge installed is doing the entire job. It is the simplest arrangement in this lineup, and the most straightforward to service because there is only one cartridge to track and change.

Typical application. Lower-volume applications, a single piece of equipment, or any spot where one cartridge's flow rate and capacity are enough.

Part Number 105381
Series Aquamor BGE
Configuration Single
Flow Arrangement Single stage
Filter Heads 1
Port Size 3/8 in NPT
Rinse Valve No
Pressure Gauge No
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response the same business day.
Contact Customer Service
Aquamor BGE Single filter manifold, part number 105381
Product Line Aquamor BGE filter manifolds. See the full manifold line.